The_Matrix
January 20, 2022, 06:38:15 pm
Welcome, Guest. Please login or register.

Login with username, password and session length
News: Guests: Register for a free account today, and you can customize your profile, read hidden boards, and add your own posts and comments too!
 
  Home Help Search Arcade Gallery Staff List Login Register  

Is your home or work wireless network secure?

Pages: [1]   Go Down
  Print  
Author Topic: Is your home or work wireless network secure?  (Read 69 times)
wizer
*

Karma: 9
Offline Offline

Posts: 1950



« on: January 28, 2009, 03:23:00 pm »

"Is it safe to use wireless Internet access in my home? I've heard that neighbors or even people driving by can tap in to my wireless signal. There must be a way to do it safely, since it's so common these days. Got any tips on wireless security?"

Condensed from HERE. See the full article for example screenshots.

In the last few years, wireless home networks have exploded onto the scene, driven by inexpensive equipment and the desire to set up home networks quickly and easily to access broadband Internet connections. Wireless networks require no drilling and eliminate unsightly cables hanging from the ceiling or tangling under desks.

However, many home users don't realize that by eliminating cables, they are exposing themselves to significant security risk. Cabled networks have an inherently secure feature; only computers physically attached to the network can access the data. Wireless networks, however, are often configured by default to allow access to any computer that attempts to connect to the network. In other words, anyone driving by with a laptop looking for stray wireless signals or anyone with a wireless network card in a neighboring house can use networks configured in that way.

Fortunately, there are two wireless security encryption standards you can use. Wireless Encryption Protocol (WEP) has been around for several years, is supported by all routers and wireless adapters, and provides adequate security for home users. Newer routers and wireless adapters offer the even more secure WiFi Protected Access (WPA), the latest standard in wireless network encryption. If your network router and the wireless adapter in your computer both support WPA, use it. Otherwise, you'll have to use WEP security.

Since there are many different router manufacturers, and they all have their own setup procedures, it's not possible to cover WEP/WPA configuration for all products. The basics are covered here. You can refer to the manufacturer's guide for your particular hardware, enclosed with the product or on their website.

The first step is to configure your wireless router to use encryption. (Some routers are shipped with encryption turned off, and some are configured with default passwords that must be changed.) This requires connecting to the router physically (usually using a network cable or USB cable) and setting the security to WEP or WPA following the instructions that came with the router. (Trying to configure the network while connected wirelessly is difficult, because the computer loses connection immediately when the security change kicks in.)

To connect with your router, you'll need to know its IP address. Open a Windows command prompt by clicking Start / Run, then enter CMD and press Enter. When the command prompt window appears, enter the IPCONFIG command. The address shown on the Default Gateway line is the one you want, and is usually 192.168.0.1 or 192.168.1.1 but in any case, your router's manual should tell you the address if you can't otherwise find it. Open your web browser and enter something like this: http://192.168.0.1 (but use the correct address for YOUR router).

If you don't have the user manual, just poke around in the setup screens to find the right place to change the wireless security settings

In a nutshell, you must supply your own SSID (be creative), make sure encryption is turned ON, and provide a key (password) that any wireless computer will need to connect to your network.

Some Notes on WPA Setup

As mentioned before, if your router and your computer's wireless adapter both support WPA, that's the most secure and the recommended way to go. PA networks require a password -- sometimes called a passphrase or Pre-Shared Key (PSK) -- that is used to authenticate computers attempting to connect to the network. I recommend that you make your WPA password at least thirty-two characters long and a mixture of uppercase letters, lowercase letters, and numbers to enhance the security of your network.

Configuring Your Wireless Adapter

Once you have enabled WEP or WPA, selected an SSID, and provided a password, each wireless computer on the network needs to be configured to access the network. Follow the instructions that came with your computer or wireless adapter to set each computer's wireless interface for WEP or WPA encryption and enter the same password that was entered on the router. Windows XP has greatly simplified making a wireless connection, so in most cases you will simply be prompted to enter the security password.

Your wireless computers should now be able to connect to the network and share the Internet connection. If it doesn't work, refer to the troubleshooting instructions that came with the wireless adapter.
Report Spam   Logged

Share on Facebook Share on Twitter



Pages: [1]   Go Up
  Print  
 
Jump to:  

Powered by EzPortal
Bookmark this site!
Powered by SMF | SMF © 2016, Simple Machines
Privacy Policy